Every restoration follows the same proven on-site order; here is the process: 

1. Safety Rails
Safety rails are installed first, so the crew can work safely across the entire roof.

2. Roof Cleaning
The roof is pressure-cleaned with high-PSI pressure washers to remove moss and lichen, and gutters are cleaned thoroughly around the whole house once the wash is done. 

3. Rebedding
Old, crumbling mortar is removed from the ridge caps and replaced with new mortar, ensuring the caps stay secure and do not crack or come loose. 

4. Repointing
Flexible, rubberised pointing is applied over the rebedded ridge caps, so they won't crack from strong winds or normal house movement. 

5. Replacing Broken Tiles
Any cracked or broken tiles are replaced to ensure the roof surface is fully sealed before painting.

6. Valley Replacement
Rusted valleys, which tend to cause leaks and damage interior plaster and ceilings, are replaced and left dry to prevent further leaks.

7. Roof Painting — 4-Coat System
A 4-coat system is sprayed on: a maxi primer as the first coat, followed by three coats of colouring sealant, using paint tested over 25 years and available in 42 colours.

The core process stays the same, but how it's carried out changes by roof material.

Here are different roofing materials explained: 

• Concrete Tile Roof Restoration
  Melbourne's most common roof type. Standard process: pressure cleaning, rebedding, repointing, tile replacement, and a 4-coat paint finish.
• Terracotta Tile Roof Restoration
  More brittle than concrete, so tiles need extra care during cleaning and replacement. Same steps, slower process.
• Colorbond Roof Restoration
  Safety rails, pressure cleaning, rusted screw replacement, then a 3-coat spray finish. Faster than a tile restoration.
• Metal Roof Restoration
  Focused on treating rust, resealing joints, and applying a protective coating suited to metal surfaces.

(Cost differences by roof type are covered in the pricing section below.)

A few key factors shape how much work a restoration needs, which in turn defines its cost. Here are the factors: 

• Roof Size
  Bigger roof, more materials and labour at every stage.
• Existing Roof Condition
  Cracks, rust, leaks or years of neglect mean more work before painting can start.
• Cleaning Requirements
  Heavy buildup of moss, algae, or dirt requires extra treatment during pressure cleaning.
• Repairs Required
  Rebedding, repointing, and valley replacement are included in the scope depending on the roof condition.
• Coating System Layers
  A primer coat plus sealant coats make up the finish. Extra coverage means extra layers.

Together, these factors set the scope for the pricing breakdown below.

The cost of a roof restoration in Melbourne depends mainly on roof size, material, and condition. Below is a general guide based on typical project pricing.

Pricing by Roof Area

General Pricing Reference

Cost by Roof Type

Every roof is different; pricing can only be confirmed after a proper site inspection.
And that is why, at Melbourne Quality Roofing, we provide a free roof assessment to understand the roof's condition, size, and access requirements before providing an accurate, fixed quote.

For a more detailed breakdown of what influences roof restoration pricing, see our full guide: How Much Does a Roof Restoration Cost?

We start every quote with drone shots of your home’s roof. This lets us check the whole roof properly, no guesswork, no climbing required before pricing, and at Melbourne Quality Roofing, we provide a free no-obligation roof inspection.

Those photos are then shared with you, so you can see the actual condition of your roof for yourself: cracked tiles, rusted valleys, worn ridge caps, whatever's there.

From there, we put together a complete cost breakdown based on the roof's size, condition, and material. It covers everything involved: rebedding, repointing, tile replacement, gutter cleaning, and chimney or roof pipe work where needed.

Pricing is explained differently depending on your roof type too, a tile roof restoration quote focuses on rebedding and repointing, while a Colorbond roof restoration quote focuses on rust treatment and coating. 

When it comes to restoring a home’s roof, here's why thousands of Melbourne homeowners choose Melbourne Quality Roofing: 

• Australian-Owned and Operated
  A proudly local Melbourne business built on delivering quality roofing results for Australian homeowners.
• Award-Winning and 5-Star Rated
  Recognised as Melbourne's Best Roofing Contractor in 2023 and 2024, and backed by hundreds of 5-star Google reviews from satisfied homeowners.
• 35 Years of Roofing Experience
  Decades of hands-on experience restoring and repairing roofs across Melbourne's diverse suburbs and conditions.
• Fully Insured and Licensed
  Every job is carried out by a fully licensed and insured team, giving homeowners complete peace of mind from start to finish.
• 10-Year Workmanship Guarantee
  All restoration work is backed by a decade-long workmanship guarantee — because quality work should stand the test of time.
• Premium 4-Coat Painting System
  Only the highest-grade water-based acrylic paints are used, tested and trusted by Melbourne Quality Roofing for over 25 years.

Ready to hire Melbourne's most trusted roofing team?